China Standard Factory Price Furukawa Hb30g Hydraulic Hammer Cylinder Made in Yantai with Free Design Custom

Product Description

1.PRODUCT DETAILS                                             

 

OUR FACTORY IN HangZhou CITY,ZheJiang PROVINCE ,CHINA
OUR PRODUCT SPECAILIZED IN MANUFACTURE HYDRAULIC HAMMER
MOQ  1 SET 
OEM  YES.BECAUSE WE ARE A FACTORY
COLOR ANY COLOR COULD DO FOR YOU 
PAYMENT 30% DEPOSIT ,BALANCE BEFORE SHIPPING ,T/T  OR L/C  
DELIVERY DATE  1-50 SET    1-25DAYS.
SHIPPING  BY SEA O BY AIR 

YTCT  HYDRAULIC HAMMER :

MODE NUMBER  CHISEL DIAMETER  SUIT EXCAVATOR (WEIGHT) BRAND OF EXCAVATOR  HYDRAULIC OIL FLOW HYDRAULIC PRESSURE  BLOW FREQUENCY MAIN BODY WEIGHT  HOSE DIAMETER ACCUMALATOR PRESSURE 
YTCT MM TON   L/MIN KG/CM2 BMP KG INCH KG/CM2
YTCT 35 0.5-0.8 ANY BRAND 10–20 90-120 800-1400 40 1/2 /
YTCT10 40 0.8-2.5 15-25 90-120 800-1400 53 1/2 /
YTCT20 45 1.2-3.0 20-30 90-120 700-1200 71 1/2 /
YTCT30 53 2.5-4.5 25-50 90-120 600-1100 89 1/2 /
YTCT40 68 4–7 40-70 110-140 500-900 156 1/2 /
YTCT43 75 6–9 50-90 120-150 400-800 214 1/2 /
YTCT45 85 7–14 60-100 130-160 400-800 282 1/2 /
YTCT50 100 10–15 80-110 150-170 350-700 479 3/4 /
YTCT70 135 16-25 130-150 160-180 400-800 850 1 /
YTCT81 140 18-26 120-180 160-180 350-500 920 1 /
YTCT81A 140 18-26 120-180 160-180 350-500 956 1 60
YTCT100 150 27-35 150-190 160-180 350-700 2218 1 60
YTCT121 155 28-35 180-240 160-180 300-450 2577 1 60
YTCT131 165 30-40 200-260 160-180 250-400 1442 1 60
YTCT140 165 30-40 200-270 160-180 250-380 1590 1 60
YTCT151 175 35-40 210-290 160-180 200-350 1925 5/4 60
YTCT151L 175 35-45 220-270 200-240 200-300 1933 5/4 60
YTCT185 185 40-55 220-270 180-220 250-320 2295 5/4 60
YTCT190 190 45-60 220-290 180-220 180-200 2526 5/4 60
YTCT195 195 45-60 220-290 180-220 180-200 2600 5/4 60

our breaker could suit any brand 0.5-70Tons excavator ,
chisel from 35mm to 210mm 

ALL THE PRICE WITH SPARE PARTS AS BELOW:

1.all the price with wooden box pacakage .
2.all the price with the standard spare parts.
**  —–2 chisels 
**  —–2 oil tube 
**  —–1 N2 gas bottle.
**  —–1 tool box 
** —–1 N2 pressure gauge

2.PACKING AND SHIPPING                                                 

1.Inner is stretch film, outside is export wooden case or as customer’s request
 

2.Delivery time:Usually 3-7days (1-5sets) after down payment.
 

3..We can arrange CZPT or air transportation according to your request from any port of China.

  ****OUR FACTORY                                                      

***we are a factory in HangZhou city,ZheJiang province,China

***we specialized in manufacturing soosan SB series hydraulic breaker more than 10 years.Chisel diameter from 35mm to 195mm .there are 3 type of our hydraulic breaker, Side type ,top open type and box silenced type hydraulic breaker .

we are a factory in HangZhou ,ZheJiang ,china .

specialized in manufacturing hydraulic breaker ,quick hitch ,ripper ,etc for excavator attachment .

HOW TO CHOOSE OUR BREAKER ?

1. PLEASE LET US KNOW YOUR EXCAVATOR MODEL NUMBER OR WEIGHT OF MACHINE.

2.PLEASE LET US KNOW WHAT COLOR DO YOU NEED FOR BREAKER .

3.PLEASE CHECK THE ABCDE SIZE FOR US ,ARM  EAR WIDTH ,PIN DIAMETER  AND PIN CENTER TO PIN CENTER SIZE .

4.CHOOSE WHAT TYPE OF HYDRAULIC BREAKRE DO YOU NEED ,THANKS.

NEED  FREE CATALOG OR MORE PRICE,SEND ME INQUIRY AS BELOW.

MISS  ASHLEY WILL REPLY SOON,THANKS.

                   

The 5 components of an axle, their function and installation

If you’re considering replacing an axle in your vehicle, you should first understand what it is. It is the component that transmits electricity from 1 part to another. Unlike a fixed steering wheel, the axles are movable. The following article will discuss the 5 components of the half shaft, their function and installation. Hopefully you were able to identify the correct axle for your vehicle. Here are some common problems you may encounter along the way.
Driveshaft

five components

The 5 components of the shaft are flange, bearing surface, spline teeth, spline pitch and pressure angle. The higher the number of splines, the stronger the shaft. The maximum stress that the shaft can withstand increases with the number of spline teeth and spline pitch. The diameter of the shaft times the cube of the pressure angle and spline pitch determines the maximum stress the shaft can withstand. For extreme load applications, use axles made from SAE 4340 and SAE 1550 materials. In addition to these 2 criteria, spline rolling produces a finer grain structure in the material. Cutting the splines reduces the strength of the shaft by 30% and increases stress.
The asymmetric length of the shaft implies different torsional stiffness. A longer shaft, usually the driver’s side, can handle more twist angles before breaking. When the long axis is intact, the short axis usually fails, but this does not always happen. Some vehicles have short axles that permanently break, causing the same failure rate for both. It would be ideal if both shafts were the same length, they would share the same load.
In addition to the spline pitch, the diameter of the shaft spline is another important factor. The small diameter of a spline is the radius at which it resists twisting. Therefore, the splines must be able to absorb shock loads and shocks while returning to their original shape. To achieve these goals, the spline pitch should be 30 teeth or less, which is standard on Chrysler 8.75-inch and GM 12-bolt axles. However, a Ford 8.8-inch axle may have 28 or 31 tooth splines.
In addition to the CV joints, the axles also include CV joints, which are located on each end of the axle. ACV joints, also known as CV joints, use a special type of bearing called a pinion. This is a nut that meshes with the side gear to ensure proper shaft alignment. If you notice a discrepancy, take your car to a shop and have it repaired immediately.

Function

Axles play several important roles in a vehicle. It transfers power from the transmission to the rear differential gearbox and the wheels. The shaft is usually made of steel with cardan joints at both ends. Shaft Shafts can be stationary or rotating. They are all creatures that can transmit electricity and loads. Here are some of their functions. Read on to learn more about axles. Some of their most important features are listed below.
The rear axle supports the weight of the vehicle and is connected to the front axle through the axle. The rear axle is suspended from the body, frame and axle housing, usually spring loaded, to cushion the vehicle. The driveshaft, also called the propshaft, is located between the rear wheels and the differential. It transfers power from the differential to the drive wheels.
The shaft is made of mild steel or alloy steel. The latter is stronger, more corrosion-resistant and suitable for special environments. Forged for large diameter shafts. The cross section of the shaft is circular. While they don’t transmit torque, they do transmit bending moment. This allows the drive train to rotate. If you’re looking for new axles, it’s worth learning more about how they work.
The shaft consists of 3 distinct parts: the main shaft and the hub. The front axle assembly has a main shaft, while the rear axle is fully floating. Axles are usually made of chrome molybdenum steel. The alloy’s chromium content helps the axle maintain its tensile strength even under extreme conditions. These parts are welded into the axle housing.
Driveshaft

Material

The material used to make the axle depends on the purpose of the vehicle. For example, overload shafts are usually made of SAE 4340 or 1550 steel. These steels are high strength low alloy alloys that are resistant to bending and buckling. Chromium alloys, for example, are made from steel and have chromium and molybdenum added to increase their toughness and durability.
The major diameter of the shaft is measured at the tip of the spline teeth, while the minor diameter is measured at the bottom of the groove between the teeth. These 2 diameters must match, otherwise the half shaft will not work properly. It is important to understand that the brittleness of the material should not exceed what is required to withstand normal torque and twisting, otherwise it will become unstable. The material used to make the axles should be strong enough to carry the weight of a heavy truck, but must also be able to withstand torque while still being malleable.
Typically, the shaft is case hardened using an induction process. Heat is applied to the surface of the steel to form martensite and austenite. The shell-core interface transitions from compression to tension, and the peak stress level depends on the process variables used, including heating time, residence time, and hardenability of the steel. Some common materials used for axles are listed below. If you’re not sure which material is best for your axle, consider the following guide.
The axle is the main component of the axle and transmits the transmission motion to the wheels. In addition, they regulate the drive between the rear hub and the differential sun gear. The axle is supported by axle bearings and guided to the path the wheels need to follow. Therefore, they require proper materials, processing techniques and thorough inspection methods to ensure lasting performance. You can start by selecting the material for the shaft.
Choosing the right alloy for the axle is critical. You will want to find an alloy with a low carbon content so it can harden to the desired level. This is an important consideration because the hardenability of the alloy is important to the durability and fatigue life of the axle. By choosing the right alloy, you will be able to minimize these problems and improve the performance of your axle. If you have no other choice, you can always choose an alloy with a higher carbon content, but it will cost you more money.
Driveshaft

Install

The process of installing a new shaft is simple. Just loosen the axle nut and remove the set bolt. You may need to tap a few times to get a good seal. After installation, check the shaft at the points marked “A” and “D” to make sure it is in the correct position. Then, press the “F” points on the shaft flange until the points are within 0.002″ of the runout.
Before attempting to install the shaft, check the bearings to make sure they are aligned. Some bearings may have backlash. To determine the amount of differential clearance, use a screwdriver or clamp lever to check. Unless it’s caused by a loose differential case hub, there shouldn’t be any play in the axle bearings. You may need to replace the differential case if the axles are not mounted tightly. Thread adjusters are an option for adjusting drive gear runout. Make sure the dial indicator is mounted on the lead stud and loaded so that the plunger is at right angles to the drive gear.
To install the axle, lift the vehicle with a jack or crane. The safety bracket should be installed under the frame rails. If the vehicle is on a jack, the rear axle should be in the rebound position to ensure working clearance. Label the drive shaft assemblies and reinstall them in their original positions. Once everything is back in place, use a 2-jaw puller to pry the yoke and flange off the shaft.
If you’ve never installed a half shaft before, be sure to read these simple steps to get it right. First, check the bearing surfaces to make sure they are clean and undamaged. Replace them if they look battered or dented. Next, remove the seal attached to the bushing hole. Make sure the shaft is installed correctly and the bearing surfaces are level. After completing the installation process, you may need to replace the bearing seals.

China Standard Factory Price Furukawa Hb30g Hydraulic Hammer Cylinder Made in Yantai     with Free Design CustomChina Standard Factory Price Furukawa Hb30g Hydraulic Hammer Cylinder Made in Yantai     with Free Design Custom