China Professional 10L Popular Portable Oxygen Cylinder Used for Medical near me shop

Product Description

TPED/CE/EN/ISO/DOT/BV/SGS 2L/5L/7L/8L/10L/14L/20L small portable seamless steel gas cylinders filled with oxygen gas,co2 gas, argon gas,helium gas,mixture gas.etc.

Type   (mm)
Outside
Diameter
(L)
Water
Capacity
(mm)
()
Height
(Withoutvalve)
(Kg)
(,)
Weight(Without
valve,cap)
(Mpa)
Working
Pressure
(mm)
Design Wall
Thickness
Material
Grades
ISO102-1.8-150 102 1.8 325 3.5 150 3 37Mn
ISO102-3-150 3 498 5.2
ISO102-3.4-150 3.4 555 5.7
ISO102-4.4-150 4.4 700 7.2
ISO108-1.4-150 108 1.4 240 2.9 150 3.2 37Mn
ISO108-1.8-150 1.8 285 3.3
ISO108-2-150 2 310 3.6
ISO108-3-150 3 437 4.9
ISO108-3.6-150 3.6 515 5.7
ISO108-4-150 4 565 6.2
ISO108-5-150 5 692 7.5
ISO140-3.4-150 140 3.4 321 5.8 150 4.1 37Mn
ISO140-4-150 4 365 6.4
ISO140-5-150 5 440 7.6
ISO140-6-150 6 515 8.8
ISO140-6.3-150 6.3 545 9.2
ISO140-6.7-150 6.7 567 9.5
ISO140-7-150 7 595 9.9
ISO140-7.5-150 7.5 632 10.5
ISO140-8-150 8 665 11
ISO140-9-150 9 745 12.2
ISO140-10-150 10 830 13.5
ISO140-11-150 11 885 14.3
ISO140-13.4-150 13.4 1070 17.1
ISO140-14-150 14 1115 17.7
ISO159-7-150 159 7 495 9.8 150 4.7 37Mn
ISO159-8-150 8 554 10.8
ISO159-9-150 9 610 11.7
ISO159-10-150 10 665 12.7
ISO159-11-150 11 722 13.7
ISO159-12-150 12 790 14.8
ISO159-12.5-150 12.5 802 15
ISO159-13-150 13 833 15.6
ISO159-13.4-150 13.4 855 16
ISO159-13.7-150 13.7 878 16.3
ISO159-14-150 14 890 16.5
ISO159-15-150 15 945 17.5
ISO159-16-150 16 1000 18.4
ISO180-8-150 180 8 480 13.8 150 5.3 37Mn
ISO180-10-150 10 570 16.1
ISO180-12-150 12 660 18.3
ISO180-15-150 15 790 21.6
ISO180-20-150 20 1015 27.2
ISO180-21-150 21 1061 28.3
ISO180-21.6-150 21.6 1087 29
ISO180-22.3-150 22.3 1100 29.4
ISO219-20-150 219 20 705 27.8 150 6.1 37Mn
ISO219-25-150 25 855 32.8
ISO219-27-150 27 915 34.8
ISO219-36-150 36 1185 43.9
ISO219-38-150 38 1245 45.9
ISO219-40-150 40 1305 47.8
ISO219-45-150 45 1455 52.9
ISO219-46.7-150 46.7 1505 54.6
ISO219-50-150 50 1605 57.9

RECORD OF HYDROSTATIC TESTS ON CYLINDERS                Time≥ 60S
S.N Serial No. The weight without valve&cap(kg) Volumetric Capacity(L)  Total expansion(ml) Permanent expansion(ml)  Percent of Permanent to totalexpanison(%) Test Pressure 250Bar  Lot and Batch No.
1 20S049001 13.7 10.3 76.8  1 1.3  25 S05
2 20S049002 13.7 10.2 78.9  1.1 1.4  25 S05
3 20S049003 14.1 10.2 76.0  0.6 0.8  25 S05
4 20S049004 14.1 10.2 78.0  0.9 1.2  25 S05
5 20S049005 14 10.2 77.0  0.7 0.9  25 S05
6 20S049006 14.3 10.2 77.0  0.6 0.8  25 S05
7 20S049007 13.8 10.3 77.8  1 1.3  25 S05
8 20S049008 14 10.2 76.0  0.6 0.8  25 S05
9 20S049009 14.1 10.2 78.0  0.7 0.9  25 S05
10 20S049571 13.9 10.2 76.0  0.8 1.1  25 S05
11 20S049011 14.1 10.2 79.9  0.7 0.9  25 S05
12 20S049012 13.9 10.1 78.1  0.8 1.0  25 S05
13 20S049013 14 10.2 78.0  0.8 1.0  25 S05
14 20S049014 13.9 10.1 79.1  0.7 0.9  25 S05
15 20S049015 14 10.2 77.0  0.9 1.2  25 S05
16 20S049016 13.9 10.2 77.0  0.8 1.0  25 S05
17 20S049017 14 10.2 78.9  0.7 0.9  25 S05
18 20S049018 14.1 10.2 76.0  0.6 0.8  25 S05
19 20S049019 13.8 10.2 78.0  0.9 1.2  25 S05
20 20S049571 14 10.2 76.0  0.7 0.9  25 S05
21 20S049571 14 10.2 79.9  0.9 1.1  25 S05
22 20S049571 14 10.2 78.0  0.9 1.2  25 S05
23 20S049571 13.9 10.3 78.8  0.7 0.9  25 S05
24 20S049571 14 10.2 79.9  0.8 1.0  25 S05
25 20S049571 14.1 10.2 79.9  0.9 1.1  25 S05
26 20S049026 14.1 10.2 78.0  0.8 1.0  25 S05
27 20S049571 14 10.2 77.0  0.9 1.2  25 S05
28 20S049571 14 10.2 78.9  1 1.3  25 S05
29 20S049571 14 10.3 75.8  0.8 1.1  25 S05
30 20S049030 13.9 10.2 78.9  0.8 1.0  25 S05
31 20S049031 13.9 10.1 79.1  1 1.3  25 S05
32 20S049032 14 10.3 76.8  0.9 1.2  25 S05
33 20S049033 14 10.2 76.0  0.7 0.9  25 S05
34 20S049034 14 10.2 78.9  0.9 1.1  25 S05
35 20S049035 13.9 10.2 79.9  1 1.3  25 S05
36 20S049036 14 10.3 76.8  1.1 1.4  25 S05
37 20S049037 13.8 10.2 78.9  0.6 0.8  25 S05
38 20S049038 13.9 10.2 77.0  0.8 1.0  25 S05
39 20S049039 13.8 10.2 78.0  0.8 1.0  25 S05
40 20S049040 13.9 10.2 78.9  1 1.3  25 S05
41 20S049041 14 10.2 78.0  0.7 0.9  25 S05
42 20S049042 14.2 10.1 81.1  1.1 1.4  25 S05
43 20S049043 14.1 10.2 78.9  0.9 1.1  25 S05
44 20S049044 13.9 10.1 81.1  0.8 1.0  25 S05
45 20S049045 13.9 10.2 78.9  0.9 1.1  25 S05
46 20S049046 14.1 10.2 78.9  1 1.3  25 S05
47 20S049047 13.9 10.2 79.9  0.9 1.1  25 S05
48 20S049048 13.9 10.1 81.1  0.9 1.1  25 S05
49 20S049049 13.6 10.4 75.7  1 1.3  25 S05
50 20S049050 13.9 10.1 77.1  0.8 1.0  25 S05

 

Helical, Straight-Cut, and Spiral-Bevel Gears

If you are planning to use bevel gears in your machine, you need to understand the differences between Helical, Straight-cut, and Spiral bevel gears. This article will introduce you to these gears, as well as their applications. The article will also discuss the benefits and disadvantages of each type of bevel gear. Once you know the differences, you can choose the right gear for your machine. It is easy to learn about spiral bevel gears.
gear

Spiral bevel gear

Spiral bevel gears play a critical role in the aeronautical transmission system. Their failure can cause devastating accidents. Therefore, accurate detection and fault analysis are necessary for maximizing gear system efficiency. This article will discuss the role of computer aided tooth contact analysis in fault detection and meshing pinion position errors. You can use this method to detect problems in spiral bevel gears. Further, you will learn about its application in other transmission systems.
Spiral bevel gears are designed to mesh the gear teeth more slowly and appropriately. Compared to straight bevel gears, spiral bevel gears are less expensive to manufacture with CNC machining. Spiral bevel gears have a wide range of applications and can even be used to reduce the size of drive shafts and bearings. There are many advantages to spiral bevel gears, but most of them are low-cost.
This type of bevel gear has 3 basic elements: the pinion-gear pair, the load machine, and the output shaft. Each of these is in torsion. Torsional stiffness accounts for the elasticity of the system. Spiral bevel gears are ideal for applications requiring tight backlash monitoring and high-speed operations. CZPT precision machining and adjustable locknuts reduce backlash and allow for precise adjustments. This reduces maintenance and maximizes drive lifespan.
Spiral bevel gears are useful for both high-speed and low-speed applications. High-speed applications require spiral bevel gears for maximum efficiency and speed. They are also ideal for high-speed and high torque, as they can reduce rpm without affecting the vehicle’s speed. They are also great for transferring power between 2 shafts. Spiral bevel gears are widely used in automotive gears, construction equipment, and a variety of industrial applications.

Hypoid bevel gear

The Hypoid bevel gear is similar to the spiral bevel gear but differs in the shape of the teeth and pinion. The smallest ratio would result in the lowest gear reduction. A Hypoid bevel gear is very durable and efficient. It can be used in confined spaces and weighs less than an equivalent cylindrical gear. It is also a popular choice for high-torque applications. The Hypoid bevel gear is a good choice for applications requiring a high level of speed and torque.
The Hypoid bevel gear has multiple teeth that mesh with each other at the same time. Because of this, the gear transmits torque with very little noise. This allows it to transfer a higher torque with less noise. However, it must be noted that a Hypoid bevel gear is usually more expensive than a spiral bevel gear. The cost of a Hypoid bevel gear is higher, but its benefits make it a popular choice for some applications.
A Hypoid bevel gear can be made of several types. They may differ in the number of teeth and their spiral angles. In general, the smaller hypoid gear has a larger pinion than its counterpart. This means that the hypoid gear is more efficient and stronger than its bevel cousin. It can even be nearly silent if it is well lubricated. Once you’ve made the decision to get a Hypoid bevel gear, be sure to read up on its benefits.
Another common application for a Hypoid bevel gear is in automobiles. These gears are commonly used in the differential in automobiles and trucks. The torque transfer characteristics of the Hypoid gear system make it an excellent choice for many applications. In addition to maximizing efficiency, Hypoid gears also provide smoothness and efficiency. While some people may argue that a spiral bevel gear set is better, this is not an ideal solution for most automobile assemblies.
gear

Helical bevel gear

Compared to helical worm gears, helical bevel gears have a small, compact housing and are structurally optimized. They can be mounted in various ways and feature double chamber shaft seals. In addition, the diameter of the shaft and flange of a helical bevel gear is comparable to that of a worm gear. The gear box of a helical bevel gear unit can be as small as 1.6 inches, or as large as 8 cubic feet.
The main characteristic of helical bevel gears is that the teeth on the driver gear are twisted to the left and the helical arc gears have a similar design. In addition to the backlash, the teeth of bevel gears are twisted in a clockwise and counterclockwise direction, depending on the number of helical bevels in the bevel. It is important to note that the tooth contact of a helical bevel gear will be reduced by about 10 to 20 percent if there is no offset between the 2 gears.
In order to create a helical bevel gear, you need to first define the gear and shaft geometry. Once the geometry has been defined, you can proceed to add bosses and perforations. Then, specify the X-Y plane for both the gear and the shaft. Then, the cross section of the gear will be the basis for the solid created after revolution around the X-axis. This way, you can make sure that your gear will be compatible with the pinion.
The development of CNC machines and additive manufacturing processes has greatly simplified the manufacturing process for helical bevel gears. Today, it is possible to design an unlimited number of bevel gear geometry using high-tech machinery. By utilizing the kinematics of a CNC machine center, you can create an unlimited number of gears with the perfect geometry. In the process, you can make both helical bevel gears and spiral bevel gears.

Straight-cut bevel gear

A straight-cut bevel gear is the easiest to manufacture. The first method of manufacturing a straight bevel gear was to use a planer with an indexing head. Later, more efficient methods of manufacturing straight bevel gears were introduced, such as the Revacycle system and the Coniflex system. The latter method is used by CZPT. Here are some of the main benefits of using a straight-cut bevel gear.
A straight-cut bevel gear is defined by its teeth that intersect at the axis of the gear when extended. Straight-cut bevel gears are usually tapered in thickness, with the outer part being larger than the inner portion. Straight-cut bevel gears exhibit instantaneous lines of contact, and are best suited for low-speed, static-load applications. A common application for straight-cut bevel gears is in the differential systems of automobiles.
After being machined, straight-cut bevel gears undergo heat treatment. Case carburizing produces gears with surfaces of 60-63 Rc. Using this method, the pinion is 3 Rc harder than the gear to equalize wear. Flare hardening, flame hardening, and induction hardening methods are rarely used. Finish machining includes turning the outer and inner diameters and special machining processes.
The teeth of a straight-cut bevel gear experience impact and shock loading. Because the teeth of both gears come into contact abruptly, this leads to excessive noise and vibration. The latter limits the speed and power transmission capacity of the gear. On the other hand, a spiral-cut bevel gear experiences gradual but less-destructive loading. It can be used for high-speed applications, but it should be noted that a spiral-cut bevel gear is more complicated to manufacture.
gear

Spur-cut bevel gear

CZPT stocks bevel gears in spiral and straight tooth configurations, in a range of ratios from 1.5 to five. They are also highly remachinable except for the teeth. Spiral bevel gears have a low helix angle and excellent precision properties. CZPT stock bevel gears are manufactured using state-of-the-art technologies and know-how. Compared with spur-cut gears, these have a longer life span.
To determine the strength and durability of a spur-cut bevel gear, you can calculate its MA (mechanical advantage), surface durability (SD), and tooth number (Nb). These values will vary depending on the design and application environment. You can consult the corresponding guides, white papers, and technical specifications to find the best gear for your needs. In addition, CZPT offers a Supplier Discovery Platform that allows you to discover more than 500,000 suppliers.
Another type of spur gear is the double helical gear. It has both left-hand and right-hand helical teeth. This design balances thrust forces and provides extra gear shear area. Helical gears, on the other hand, feature spiral-cut teeth. While both types of gears may generate significant noise and vibration, helical gears are more efficient for high-speed applications. Spur-cut bevel gears may also cause similar effects.
In addition to diametral pitch, the addendum and dedendum have other important properties. The dedendum is the depth of the teeth below the pitch circle. This diameter is the key to determining the center distance between 2 spur gears. The radius of each pitch circle is equal to the entire depth of the spur gear. Spur gears often use the addendum and dedendum angles to describe the teeth.

China Professional 10L Popular Portable Oxygen Cylinder Used for Medical     near me shop China Professional 10L Popular Portable Oxygen Cylinder Used for Medical     near me shop