China Position Sensing Hydraulic Cylinders hydraulic cylinder experience

Product Description

one.hydraulic cylinder can be utilised with hydraulic station.

two.Variety is as follows.

three.The front and rear cylinder heads of this collection of hydraulic cylinders are made of carbon steel.

four.Sturdy structure.

5.The shaft is created of medium carbon metal S45C metal rod . The surface area is tough-plated and polished to mirror luminosity . It has robust rigidity , dress in resistance and corrosion resistance .

6.The interior wall of the hydraulic cylinder is manufactured of twilight carbon steel pipe , and the induction sort is manufactured of twilight stainless steel cylinder tube.

seven.The endpoint can pick to set the buffer system.

Specification

Bore Φ20,Φ25,Φ32,Φ40,Φ50,Φ60,Φ70,Φ80,Φ90,Φ100
Tatal stroke 40,fifty,60,eighty,ninety,100,a hundred
Actuation oil iso vg68
Highest use strain 210kgf/cm
working temperature range -ten~+60°C

 

How toorder

Bore Φ20,Φ25,Φ30,Φ40,Φ50,Φ60,Φ70,Φ80,Φ90,Φ100
Stroke 20-2000mm
Rod type female thread,male thread
q’ty of rod single conclude rod,double stop rod

Packaging & Delivery

About US
HangZhou you jia xin equipment equipment Co., Ltd was proven in2006, it really is 1 of the top hydraulic cylinder makers in China, specializes in the production of hydraulic cylinders for various kinds of equipment, Our variety of goods contains each common cylinders (double-acting and one performing), tie-rod cylinder, ultra- skinny cylinder welded rod cylinders custom-created cylinders according to our customers’ requests. We are functioning with prestigious condition-owned companies zijin Mining and identified in cylinder industry commonly for high provider that we supply.

The organization at the moment employs a hundred thirty five staffs, among whom, 8 individuals are R & D and engineering technological personnel, get 35 patents established”yozece” model. At current, the manufacturing facility has recognized 3 creation bases, handles an spot of twelve thousand m2. In 2571 once-a-year sales revenue above a hundred million Yuan.

Pre-sale: Our engineering team combines a long time of encounter with computer-aided technology. No subject your software, design challenge or geographic location, our engineers can work with you to develop the appropriate custom made hydraulics solutions.

In the course of the manufacturing, we have semi-automated and completely automatic tools for manufacturing 1 piece to production quantities. What is far more Our proprietary and personalized created ERP technique drives expedient estimates and proficiently synchronizes manufacturing method scheduling. This device offers our buyers with short direct moments whilst keeping on-time shipping and delivery.

Right after-sale: All the hydraulic cylinder we made contain a 3-12 months restricted warranty support. And give professional engineering assist and seek the advice of life span.

Any query or need about hydraulic cylinders yozece is listed here to serve you.

FAQ

  1. Do you take OEM manufacturing?
    Indeed! We do accept OEM production. so we can give the best price as effectively as the 1st course support.
     
  2. Could we get small amount samples?
    Yes! We comprehend the top quality test is important and we are happy to make the sample for you. The MOQ could be 1pcs.
     
  3. Can you give free sample? How prolonged can we count on to get the sample?
    Sample can be cost-free of charge if deposit for potential order received. samples require 5-10days if need to have customized make . regular can be ship out in 2 times.
     
  4. How lengthy is the manufacturing time?
    Typically about 30 days.
     
  5. What is the warranty?
    1year against B/L date.

US $65-80
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO9001
Pressure: Low Pressure
Work Temperature: High Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bore Φ20,Φ25,Φ32,Φ40,Φ50,Φ60,Φ70,Φ80,Φ90,Φ100
Tatal stroke 40,50,60,80,90,100,100
Actuation oil iso vg68
Maximum use pressure 210kgf/cm
operating temperature range -10~+60°C

###

Bore Φ20,Φ25,Φ30,Φ40,Φ50,Φ60,Φ70,Φ80,Φ90,Φ100
Stroke 20-2000mm
Rod type female thread,male thread
q’ty of rod single end rod,double end rod
US $65-80
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO9001
Pressure: Low Pressure
Work Temperature: High Temperature
Acting Way: Double Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bore Φ20,Φ25,Φ32,Φ40,Φ50,Φ60,Φ70,Φ80,Φ90,Φ100
Tatal stroke 40,50,60,80,90,100,100
Actuation oil iso vg68
Maximum use pressure 210kgf/cm
operating temperature range -10~+60°C

###

Bore Φ20,Φ25,Φ30,Φ40,Φ50,Φ60,Φ70,Φ80,Φ90,Φ100
Stroke 20-2000mm
Rod type female thread,male thread
q’ty of rod single end rod,double end rod

Buying Guide For Hydraulic Cylinders

Whether you are looking to replace a broken hydraulic cylinder or are interested in learning more about them, you will be glad to know that there are many options to choose from. The materials used to build cylinders, their stroke lengths and seals are just a few things to consider.hydraulic cylinders

‘Parallel’ vs ‘Series’ cylinders

Choosing a hydraulic cylinder that is a good fit for your application is important. In general, there are two types of hydraulic cylinders: single-rod and tandem. In tandem cylinders, the two cylinders move in unison. This is the best way to transfer energy.
A welded body hydraulic cylinder is the most common type of hydraulic cylinder. It is used in construction equipment and other heavy industries. The cylinder body is welded in place and the base end is welded to it. It is normally rated for higher pressures.
A welded body hydraulic cylinder also has a built-in directional control valve. This valve works on both the inlet and the work ports. The oil from the pump goes through the control valves in series. This type of control valve usually has a small orifice drilled into it. It creates a pressure differential that forces the cylinders to work in unison.
Another type of hydraulic cylinder is the tie rod cylinder. It has a barrel and piston rod that is mounted on the bottom of the barrel. The piston rod operates both inside the barrel and out of the barrel.
There are many other types of hydraulic cylinders. Some of the more common include the plunger type, the tie rod type, and the single rod type. There are also many other types of cylinders, but they all have one thing in common: they use hydraulic fluid to power the piston.
The best hydraulic cylinder is one that can lift its weight. It is also important to select the best size for your application. The size of the cylinder depends on the load you intend to lift. If the loads are too large, you may have a difficult time maintaining synchronization. However, if the loads are not too heavy, you may be able to achieve the desired performance.
The hydraulic series relationship is a good place to start. If the loads are evenly distributed, the cylinders will work in unison. The flow control valves are a good way to keep cylinders in sync. A pilot-operated check valve is a good choice, as it will stop oil transfer when the mid-stroke is stopped.

Stroke lengths

Regardless of whether you’re buying a hydraulic cylinder for a small engine or a large excavator, the following guide can help you determine the optimal stroke length. The length is measured in inches. This is a standard measurement and is easy to obtain. The stroke is the distance covered by the rod and piston between the fully extended height and the fully retracted height of the cylinder.
The cylinder’s stroke can be measured in one of three ways. It can be based on the diameter of the rod, the diameter of the bore, or the difference between the maximum extended length and the minimum extended length. The cylinder’s stroke can range from a fraction of an inch to several feet. The stroke is a good indicator of the length of pull that can be exerted from the piston.
The largest part of the hydraulic cylinder is the rod. It is a round chrome-plated steel bar that performs the reciprocating motion. The diameter of the rod ranges from a few inches to twenty inches. It is referred to as the shiny part of the cylinder.
The retracted length is the distance between the centers of the mounting pins when the cylinder is closed. It is a standard measurement and can be measured with a tape measure. The retracted length is important for the proper functioning of the cylinder.
Using the retracted length, calculate the cylinder’s stroke. The stroke is the distance covered by the piston and rod between the fully extended height and the fully shortened height of the cylinder. This is the best indication of the length of pull that can be exerted.
The stroke is also the best indication of the length of lift that can be exerted from the piston. It can be measured using a caliper. The caliper can be used to measure the diameter of the rod and the thickness of the piston. It can also be used to calculate the difference between the maximum extended length and the maximum retracted length. This gives you the maximum length in the retracted position.hydraulic cylinders

Materials used

Various materials are used in the manufacture of hydraulic cylinders. The materials have to be tough and durable enough to withstand the pressures of the hydraulic fluid. Besides, the materials must also be compatible with the hydraulic fluid. If the materials are not strong enough, the cylinder may not fully stroke.
Hydraulic cylinders are made of steel and other durable materials. They can be used in a variety of applications. They are used in manufacturing, construction, mining, and industrial technology. They can also be found in the aviation and aircraft industry. They have also been used in forestry.
Most hydraulic cylinders are made of 1018/1020 cold rolled steel. They are usually coated with Hard Chrome Plating to prevent corrosion. A variety of coatings are also available for cylinders.
In hydraulic systems, the fluid used is usually mineral oil or water glycol. Some cylinders also use fire resistant water glycol-based fluid. However, this type of fluid may still cause lubrication problems.
Another material used in hydraulic cylinders is stainless steel. These are generally inexpensive and easy to find. They are also environmentally friendly and work well with fuels and solvents. They are also durable in acidic environments.
Composite materials have also been used in the aerospace industry for years. They have also been used in high pressure vessels for CNG storage. They have a higher strength to weight ratio than steel. They have also been used in the automotive industry for many years.
The seal, piston, and steel ring work together to provide stability and control. They can also help ensure that the cylinder remains in place. These materials are also used for double-acting cylinders, which have ports on either side of the piston rod. The pressure on both sides of the piston rod helps control the movement of the cylinder.
Another type of cylinder is the tie rod style. This type of cylinder uses high-strength threaded steel tie rods to secure the cylinder. The tie rods stretch at high pressures, which allows the cylinder to function efficiently. The cylinders are commonly used in industrial factory applications.hydraulic cylinders

Seals

Choosing the right seals for hydraulic cylinders is crucial to the functioning of a hydraulic system. These seals are designed to protect the internal components of the cylinder from contamination and leakage. They are used in various industries, including construction, agriculture and industrial plants.
Hydraulic cylinder seals come in a variety of designs. They are used in both static and dynamic applications. They are also subjected to high temperatures and high pressures. Therefore, they must be made of the right material to withstand the tough conditions. The seals must also be able to resist the change of hydraulic fluid.
Hydraulic cylinder seals are made from materials such as PTFE, polyurethane and rubber. These materials provide a durable seal for cylinders. They are also resistant to abrasion and tearing.
Seals for hydraulic cylinders are categorized into static and dynamic designs. Static seals are typically found in round cross-sections. They are used between the piston and the cylinder pipe. They are also known as gland seals. These seals are usually attached to the cylinder pipe with a threaded connection. The gland seal usually includes a wiper ring that keeps the interior of the cylinder clean and free from contamination.
Hydraulic cylinder seals also must be able to withstand high temperatures and high pressures. They are used in a variety of applications, including logging equipment. The main sealing material for hydraulic cylinders is polyurethane.
Seals for hydraulic cylinders can be made from thermoplastic or elastomeric polymers. These materials combine the strength of plastic with the flexibility of rubber. Thermoplastic elastomers also have better elasticity, enabling them to maintain constant pressure for longer periods of time.
In dynamic sealing systems, low friction coefficients are a basic requirement. This is due to the need for maximum tightness in dynamic conditions. Seal materials must also be capable of forming a tight seal against irregular metal surfaces.
The seal material must also be able to expand rapidly to follow dimensional changes. This is important for high-pressure cylinders, as they may undergo deformation. It is also important to use a material that can withstand corrosion.
China Position Sensing Hydraulic Cylinders     hydraulic cylinder experienceChina Position Sensing Hydraulic Cylinders     hydraulic cylinder experience
editor by czh 2023-01-06