China OEM Hydraulic Cylinder for Roller Press wholesaler

Product Description

1.Main Description

 

ETERNAL company design and manufacture heavy duty hydraulic cylinders  that covering

the following fields:

 

Ø hydraulic press cylinder

Ø construction machinery cylinder

Ø mining machinery cylinder

Ø metallurgy machinery cylinder

Ø water power project cylinder

Ø marine hydraulic cylinder

Ø servo hydraulic cylinder

 

 

2. Design 

 

Not only we could manufacture all kinds of hydraulic cylinders according to the drawing from our

customers,but also we could make a design according to customer’s requirements.If you 

require our engineer to make a design,pls advise us the following specification:

 

1. Rated pressure 

2. Working pressure 

3. Test pressure 

4. Working condition and environment ,for example ,temperature ,working frequency 

5. Pulling force ,and return stroke force

6. Pulling and return speed 

7. Assembly size  

8. Seal ring requirements .For example , brand ,seal material etc .

9. Tube and piston rod raw material requirements 

10. Piston rod surface treatment requirements, for example chromating film thickness ,   

 Surface hardness etc . 

11. Painting and other spare parts requirements .

 

 

3. Manufacturing capability and cylinder size range 

 

3.1 Cylinder bore diameter :max Ø1200mm 

3.2  Cylinder length :10Meter 

3.3  Max lifting capability :50 Tons 

 

 

4.Manufacturing and inspection 

 

4.1.Cylinder tube size and choice  

 

4.1.1   According to the cylinder pressure and inside diameter size ,different steel tube Would be choosed .

 

1.  ID ≤300mm , cold rolled precision seamless tube would be choosed 

2.  300mm≤ID ≤500mm , hot rolled seamless tube would be choosed 

3.  500mm≤ID ≤1000mm, forged tube would be choosed 

 

4.1.2 Cylinder tube steel grade : SAE1571 , SAE1045 ,27SiMn , S355JR ,S355J2G3

St52-3 ,SUS304 ,SUS316L etc .  

4.1.3 Cylinder tube inside boring and honing , roughness R0.2-R0.3,

 

4.1.4 Cylinder tube inside chromating : if necessary ,tube inside chromating could be applied 

.

4.2  Piston rod  is a very important part for hydraulic cylinder .

 

4.2.1 Piston rod steel grade : SAE1045, 42CrMo4, SUS410 ,SUS420, SUS304, SUS316L 

 

4.2.2 Piston rod chromating and surface hardness .

        Eternal company ensure that every piece piston rod would be surface hardened before chromating ,

surface hardness is HRC55~60 , Chromating film thickness is 0.03~0.04mm if there is no other specific 

requirements .

 

4.3 Seal ring and O ring 

 

According to the customers’ requirements and working condition , eternal company would choose suitable 

seal ring kit , seal ring brand include :Parker , Merkel , NOK , HangZhou Rubber institute , ZheJiang  brand etc . Eternal company would supply suitable seal solution for their customer so that hydraulic cylinder has more

 lifetime , easy maintenance and simple repairing .

 

4.4 Tube and flange welding 

 

 The welding on cylinder tube and flange would be Ultrasonic tested every time , the welding seam would be 

cleaned before machining .Eternal company ensure that every welding seam has no any leak during lifetime 

 

4.5 Assembly and pressure test

 

Before hydraulic cylinder is assemblied , every spare parts would be measured and cleaned .After hydraulic

 cylinder is assemblied , pressure test would be carried out one By one , eternal company ensure that testing

 pressure is higher 30%-50% than working pressure  , and pressure holding time 30~60 minutes is necessary . Every piece hydraulic cylinder must be tested completely without any leak .

 

 4.6 Painting and storage .

 

After hydraulic cylinder pass through pressure test , painting is necessary .

  

 

Processing

 

HangZhou CZPT Heavy Industry Co.Ltd was established in 2008.Our products mainly include hydraulic baling machine , scrap shearing machine ,and all kinds of heavy duty hydraulic cylinders etc.
We specialize on design and manufacture heavy duty hydraulic cylinders , scrap baler machine and shearing machine .Our hydraulic cylinders are widely used in different industry fields including:construction machinery,mining machinery, hydro~power project, offshore drilling platform, steel plant equipment , marine machinery,hydraulic lifting system etc. We have gained 10 patents for our hydraulic cylinders.
In 2008, our servo cylinders with cylinder bore 950mm for steel mill were exported to Poland.In 2009, our hydraulic cylinders with stroke 10 meters were exported to Pakistan for water conservancy project. In 2016,cyliner with weight 90tons has been exported to Russian sucessfully .
Our hydraulic cylinder range: Bore:1000mm, Stroke:12 meter, testing pressure:50MPa We could make all kinds of hydraulic baler , hydraulic shear , scrap steel shredder machine , etc rated from 100 tons -1250tons . We could make all kinds of excavator spare parts , drill rig spare parts , steel mill spare parts according to OEM drawing , including all kinds of shaft and drill tools . We have heavy duty workshop with area 10000 square meters. There is doublelayer crane in the workshop.The lifting height could reach to 16 meter while lifting capacity could reach to 75 tons. Our machining equipment including Horizontal Lathe (11 meter ), Vertical CNC Machining Center, Display boring and milling machine, Frame type CNC machining center,CNC Lathe, Deep hole boring machine (13 meter), honing machine,etc. Testing equipment including Intelligent Pressure Test Machine, UT Detector, MT Detector, Chrome Thickness Meter, etc.
Eternal company would devote to supply first rate equipment and provide total solutionsto our customer. In the past 10 years, we devoted ourself to continuous market expanding and the researchand development of new products. Till now, our products have been export to nearly 50 countries and own good reputation from our customers .
You are welcome to visit our company !

FAQ
1. who are we?
We are based in ZheJiang , China, start from 2008,sell to Domestic Market(36.00%),Eastern Europe(21.00%),Southeast Asia(16.00%),South America(12.00%),North America(9.00%),Northern Europe(4.00%),South Asia(2.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Hydraulic Cylinder,Hydraulic Baler,Hydraulic Shear,Drill Toll,Rollers

4. why should you buy from us not from other suppliers?
We have rich experience on hydraulic baling machine, scrap shearing machine and hydraulic cylinder ,our hydraulic press has passedh through CE certification .

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,Western Union;
Language Spoken:English,Chinese,Portuguese,Russian

Overview of Different Types of Pulleys

A pulley is a wheel mounted on a shaft or shaft. Its purpose is to facilitate the movement or change of direction of the cable or taut rope, and to transmit power between the cable and the shaft. Pulleys are typically used for lifting, winding or forklift applications. If you are building your own pulley system, the following design and installation considerations should be followed. This article will give you an overview of the different types of pulleys.
pulley

Pulley System Mechanics

There are many different ways to utilize the mechanism of the pulley system. The most basic pulley system consists of a fixed wheel and a support frame. Both components are connected by ropes or cables used to support the load. A pulley system is effective when the force required to lift the load is less than the weight of the object being lifted.
One way to use a pulley system is to suspend a block with a mass of 0.80 kg on a fixed pulley. Then another person can hang a bucket weighing up to 40kg. The weight of the bucket is transferred to the fixed pulley. The rope is attached to the pulley by a loop or sling. The rope will spin and pull on the barrel or block.
The pulley system is also an important tool for lifting heavy objects. Pulleys are often used in construction equipment to make lifting heavy objects easier. Gun tackles, yard tackles, and stationary tackle systems are common examples of these devices. They use the mechanical advantage of the design to guide the force that lifts the object. If you want to learn more about pulley systems, visit Vedantu. This website will provide you with a full description of the mechanism and its application.

Types of pulleys

Many different types of pulleys are used to lift heavy objects. They change the direction of the force and are an integral part of the cable system. Therefore, pulleys can move large and heavy objects more easily. However, before buying a pulley, you should have an idea of ​​the benefits it brings. Below are some of the most common uses for pulleys.
Conical Pulley: Consists of several small conical pulleys connected to each other. The larger base of 1 pulley is used to guide the force. Round pulleys are used in the same way as step pulleys. They are widely used in industry and can be purchased at any hardware store. Pulleys are a huge investment, and the benefits they provide far outweigh the cost.
Movable Pulls: These are similar to their names, but work by allowing objects to move with the pull. Their movable parts are attached to the object to be lifted. They are also ideal for lifting heavy loads and can be found in utility elevators and construction cranes. They are also used in many other industries. They can also be made of wood, plastic or metal. The type of pulley you use depends on its intended use.

Mechanical Advantages of Pulley Systems

A pulley system is a simple machine that reduces the effort required to lift heavy loads. This mechanical advantage is proportional to the number of loops. For example, if you have a single rope loop, you must apply equal force to lift the weight. When you add another rope loop, you can lift heavier weights just by applying the same force. Therefore, a pulley system is an excellent way to use gravity to your advantage.
Mechanical advantage is a measure of the effectiveness of a pulley system. This ratio of force to work is called the mechanical advantage. In other words, if the rope system has a large mechanical advantage, it means that it requires less force to lift heavier loads. This advantage is usually measured in kilograms and is the same for all pulley systems. In general, the greater the mechanical advantage, the less effort is required to lift the load.
The mechanical advantage of a pulley system is that a single movable pulley requires half the force to lift an object than a single fixed pulley. Assuming frictionless bearings, the MA of a single pulley system is 2, similar to the MA of a single lever. A single pulley travels twice as much as it takes to move heavy objects manually.
pulley

Considerations when designing and installing a pulley system

The capacity of the pulley depends on the type and diameter of the cable. Besides its diameter, its sheath should also support it well. The basic function of the pulley is also important. However, most people tend to ignore the pulley selection process, resulting in ineffective load-pull capabilities. To avoid such problems, different parameters must be carefully considered during design and installation.
During the design and installation of the pulley system, the ratio of the cable diameter to the largest pulley diameter must be considered. Those who work in the industrial sector will have an idea of ​​this ratio. The greater the D:d ratio, the greater the capacity of the cable to withstand the load. The best way to ensure secure design is to take the right information and use it to design a system that is both robust and secure.
When designing a pulley system, it is important to remember that the pulley needs to have enough power to operate safely. In addition to horsepower, the belt should have sufficient elongation to absorb shock loads. If the elongation of the belt is very small, it is very likely that the teeth will be sheared or broken, causing serious damage to the system. Extensive belt sag should be compensated for by offsetting the driven pulley. Finally, the frame supporting the pulley should be rigid. Otherwise, the non-rigid frame will cause center distance and tooth skipping changes.

Add more pulleys to the system

Adding more pulleys to the spool might have some effect. The friction between the rope and the pulley increases with the number of pulleys, which in practice limits the number of spools. The best solution is to combine the pulleys into 1 housing. If the load is small enough, adding a few pulleys probably won’t make a difference.
Using multiple pulleys allows a single load to be lifted with half the force required. The longer the rope, the greater the mechanical advantage. In fact, a spool can withstand a load of 100 N. Additionally, adding more pulleys quadrupled the mechanical advantage. In this case, a single 100 N load would require a force of 25 Newtons.
When the rope is used, it stretches as the weight of the object increases. This will make the rope longer, increasing its length and increasing the distance over which the load can be lifted. Eventually, the rope will break and the lifted object will fall. Then you will have to buy a new rope. It may seem like an expensive proposition, but it pays off in the long run.

cast iron pulley

Cast iron pulleys are the most popular choice among industrial users. They are made of solid cast iron and usually cost very little. Their rims are held in place by a mesh that extends from a central boss. They also have spokes and arms that hold them in place. These pulleys are ideal for a variety of applications including fan belts, compressors and conveyors.
V-groove drive pulleys are ideal for general purpose pulleys. It has an inner diameter of 1 inch and is commonly used in feeders and ventilation curtain systems. Its steel straps prevent rust and ensure it meets or exceeds industry standards. 3-1/2″ cast iron pulleys are also available. In addition to the V-groove drive pulley, there are similar pulleys for power transmission. The V-groove drive pulley is powder coated for added durability.
The cross section of the arm is elliptical, with the long axis twice as long as the short axis. The radius of the arm is equal to the diameter of the pulley. The thickness of the arm is a key factor to consider when purchasing a pulley. If you’re not sure which material you need, you can always consider wooden or steel pulleys. They are lighter and have a higher coefficient of friction than metal pulleys.
pulley

timing pulley

Plastic timing pulleys have many advantages over steel timing pulleys. On the 1 hand, they are lightweight and corrosion resistant, making them ideal for applications that do not require high torque and tensile strength. Another benefit is their resistance to high temperatures. Plastic timing pulleys are ideal for applications involving flammable gases, solvents or particles. They can last for many years. For more information on the different types of plastic timing pulleys.
Vertical shaft drives require flanged timing pulleys. For large span drives, at least 1 of these pulleys must be flanged. The flange provides a secure connection to the shaft and prevents ratcheting of the timing belt. Finally, HTD timing belt teeth prevent timing belt ratcheting. These teeth need a large enough space to be seated. However, they can also cause a backlash. These pulleys are not suitable for applications where positional accuracy is critical.
Timing belt systems are designed to avoid such problems. The drive shaft and the driven shaft are aligned with each other. The pulleys are located on different planes and are connected by pitch lines. The pitch line of the timing pulley coincides with the pitch line of the belt. These pulleys are also easier to implement and maintain. It is better to use a synchronous system because the resulting gear system emits less noise than other systems.

China OEM Hydraulic Cylinder for Roller Press     wholesaler China OEM Hydraulic Cylinder for Roller Press     wholesaler